(57) Papers Found
Thermal-mechanical modeling and analysis of spindle-tapered roller bearing system
Author(s) : SEONG-WOOK HONG , VAN-CANH TONG
Study on Horizontal Evaporator Tube with Different Outer Surface Roughness under Different Feeder Water Load
Author(s) : ALIAS MOHD NOOR, LIM CHIH HOO , MUHAMMAD HANAFI MD SAH, SHEIKH HUSSAIN SHAIKH SALLEH, SRITHAR RAJOO
An Application of Hybrid Method For Improving Of Ignition System In Small Power Explosion Engine
Author(s) : AM-DO QUOC , DUNG-DO VAN , LE KHANH DIEN , TAN-LE KHANH
Experimental Analysis of a Tubular type of Evaporative Heat Exchanger
Author(s) : A. RAJNEESH , B. RAJ KUMAR
Comparative Analysis of Kerf Width Produced on GFRP composite material Using Abrasive Water Suspension Jet Machining by Taguchi Approach
Author(s) : ANJAIAH DEVINENI , DEEPAK D
Experimental investigation of solar cooker with dual sensible heat storage unit for evening cooking
Author(s) : AVADHESH YADAV
An Improved Nondominated Sorting Multiobjective Genetic Algorithm and Its Application
Author(s) : QING HAN , XIAOPING ZHONG , YAN ZHAO
Do SMEs Need Business Incubation for Productive Capacity Levels? - A Case Study
Author(s) : DINESH KHANDUJA , SAHIB SARTAJ SINGH
Effect of Operating Temperature on CI Engine Performance Parameters with Diesel & Jatropha Bio-diesel
Author(s) : KARSOLIYA R.P. , MANDLOI R.K.
Wear Behaviour and Characteristics of Worn – out Valves used in LPG – run Retrofitted Gasoline Engines
Author(s) : MANDLOI R.K. , PANDEY AJAY
Application of differential evolution algorithm for parametric optimization of WEDM while machining Nimonic-263 alloy
Author(s) : SREENIVASA RAO M , VENKAIAH N
Grey Relational Analysis and Response Surface Methodology for Modeling, Analyzing and Optimization of machining parameters for turning ‘Niobium C-103’
Author(s) : C.S.P. RAO , P. SHUBHASH CHANDRA BOSE
Variation of Thermal Conductivity of Polystyrene Insulation Material Under Different Operating Temperatures and Moisture Contents
Author(s) : MAATOUK KHOUKHI
Planning Of The Experimentation To Exam Deviations In Parameters Of Machine/Mechanical Taps
Author(s) : DETELINA ANGELOVA, STEFAN KARTUNOV
Finite Element Modelling of Different 2D Re-Entrant Structures of Auxetic Materials
Author(s) : MOZAFAR SHOKRI RAD, ZAINI AHMAD
Investigation of Single Slotted Cylinder Placed in a Fin Tube Heat Exchanger Model
Author(s) : BESIR SAHIN, HUSEYIN AKILLI, SEDAT YAYLA, SUAT ONAL, SULEYMAN TEKSIN
Knowledge-Based Deriven Manufacturing System (KDMS) for Injection Molding
Author(s) : CHIA-YAN TSENG, SHIA-CHUNG CHEN, WEN-REN JONG, YUNG-HSIANG CHANG
Small-hydro Floodgate Automation Using Induction Generator in Isolated Operation
Author(s) : ALEXANDRE VIANA BRAGA, ANGELO JOSE JUNQUEIRA REZEK, AUGUSTO NELSON CARVALHO VIANA, EDSON DA COSTA BORTONI, VALBERTO FERREIRA DA SILVA, WALTER DENIS CRUZ SANCHEZ
Frequency Control of Induction Generator in Stand-alone Operation Using Bynary Logic
Author(s) : ALEXANDRE VIANA BRAGA, ANGELO JOSE JUNQUEIRA REZEK, DELVIO FRANCO BERNARDES, GETULIO RIBEIRO MARQUES, JOSE CARLOS GRILO RODRIGUES, JOSE MANUEL ESTEVES VICENTE, LUCAS HENRIQUE SIMOES, VALBERTO FERREIRA DA SILVA
A Framework for simulation-driven engineering design
Author(s) : YOEL TENNE
Numerical Aerodynamic Analysis of a New Twin Engine Commuter Aircraft Longitudinal and Lateral-Directional Derivatives
Author(s) : AGOSTINO DE MARCO, CORCIONE SALVATORE, DELLA VECCHIA PIERLUIGI, NICOLOSI FABRIZIO
Assessment of Wind Turbine Grid Connection Requirements in Turkey
Author(s) : B. KEKEZOGLU, M. E. HACIBEKIROGLU
Viscosity Control for Extrusion Processes Using Recycled Polymers
Author(s) : ALAN CLARKE, BAO KHA NGUYEN, GERARD MCNALLY
Monitoring Journal Bearing Using Acoustic Emission (AE) Technique
Author(s) : R.I. RAJA HAMZAH, S.HUSIN
1D and 0D Advantage Materials Application on TCO Surface On Dye Sensitized Solar Cells
Author(s) : HALIL IBRAHIM YAVUZ
Direct Current Traction Power System Analysis in Electrical Railway Systems
Author(s) : IBRAHIM SENGOR, MUGDESEM TANRIOVEN, YUSUF BASEGMEZ
Design and Simulation of an Electromagnetic Shock Absorber
Author(s) : JAE-SUNG BAE, JAI-HYUK HWANG, JUNG-SUN PARK, MI-SEON YI
Calculation of Receptance of a Structure Modified by Mass and Grounded Spring
Author(s) : ORHAN CAKAR
Preliminary determination of flame speeds from infrared images using image processing techniques in a 150 kWth coal-fired combustion test rig
Author(s) : AHMAD RASHIDI, AZMI AHMAD, CHUN LOU, HAMDAN HASSAN, MOHD. HARIFFIN BOOSROH, MOOK TZENG LIM, NOOR AKMA WATIE MOHD NOOR, SOONG DER CHEN
Investigations of delamination in GFRP material cutting using Abrasive Waterjet Machining
Author(s) : PRASAD D UNDE, RAVINDRA GHODKE
Effect of Sisal Fibre Loading on Mechanical Properties of Jute Fibre Reinforced Epoxy Composite
Author(s) : M. K. GUPTA, R. K. SRIVASTAVA
MBSA in Early Development FOK Issues
Author(s) : ISHAK ABDUL AZID, NAGAPPAN ANNAMALAI , SHAHRUL KAMARUDDIN, SHAMSOLBAHRI YUSOFF, TEH TZE KEONG
Effects of operating conditions on temperature profiles of a coal-fired thermal power plant
Author(s) : AHMAD RASHIDI, AZMI AHMAD, HAMDAN HASSAN, MOOK TZENG LIM, NOOR AKMA WATIE MOHD NOOR
Wind Tunnel Testing for Blended Wing Body Aircraft with Canard
Author(s) : WAHYU KUNTJORO, WIRACHMAN WISNOE, ZURRIATI MOHD ALI
Aerodynamic effects of dimples on aircraft wings
Author(s) : BHADRI RAJASAI, RAVI TEJ, SINDHU SRINATH
Effect of grain size on belt finishing process of hardened steel parts
Author(s) : ABDELJABAR KHELLOUKI
A Proposed Mechanism for the Thickening Behavior of SiC– Polyethylene Glycol Abrasive Slurry during Silicon Ingot Slicing into Wafers for Photovoltaic Applications
Author(s) : RONALD ALLAN S. DE LOS REYES
Analysis of Laser Welds on Steel Processed by Q-P Process
Author(s) : IVAN VOREL, KATERINA OPATOVA, KATERINA RUBESOVA, MARTIN FRANZ-XAVER WAGNER, OMID KHALAJ
Effective Optimisation Technique Using Bivariate Interpolation Methods
Author(s) : LOKESH BS, NILOTPAL BANERJEE, PAVAN KUMAR AV, VINAYAKA N, YESHODHARA B
An Efficient Approach for Robustness-based Design Optimization under Interval Uncertainty
Author(s) : KAIS ZAMAN, PRITHBEY RAJ DEY
Single-Phase and Two-Phase Pressure Drops Across Sudden Contraction in Horizontal Rectangular Minichannel
Author(s) : AGUS SANTOSO, AKIMARO KAWAHARA, DAIKI GOTO, MICHIO SADATOMI, TOMOAKI TAKEHIRA
Comparison of mist generators between twin-fluid water suction type and single-fluid swirl type
Author(s) : AKIMARO KAWAHARA, KEIICHI TANAKA, MICHIO SADATOMI
Cyber Value Stream System Reduced Waste and Non-value Added of Manufacturing Operation
Author(s) : A.N. AIZAT AHMAD, NOFAFIFAH HUSIN, SULAIMAN HJ. HASAN
The laboratory of the flexible manufacturing systems with robotized operation for environment of drawing-free production The changes realized in an assembly workspace of an iCIM 3000 system
Author(s) : KAROL VELISEK, MICHALA SIMUNOVA, NINA VETRIKOVA, RADOVAN HOLUBEK
On the possibilities and the advantages of robot off-line programming Teaching of off-line programming methods as a tool to further industrial implementation utilization
Author(s) : DAYNIER ROLANDO DELGADO SOBRINO, KAROL VELISEK, MICHALA SIMUNOVA, NINA VETRIKOVA, RADOVAN HOLUBEK
Emission prediction model for a multidisciplinary assessment framework
Author(s) : ABAS AB WAHAB, MOHAMMAD FAHMI ABDUL GHAFIR, SITI NUR MARIANI MOHD YUNOS
Model Based Solver Application (MBSA) For Manufacturing Industries
Author(s) : NAGAPPAN ANNAMALAI , SHAHRUL KAMARUDDIN, TS YEOH
Investigation on a CI Engine Fuelled with blends of Waste Tyre oil
Author(s) : D. RAVICHANDRA, K. ABHISHEK, K. VIJAYA KUMAR, RAVI KUMAR PULI
3d simulation of stress in girth welding of pipeline Thermal Analysis of Girth Welding in Pipeline
Author(s) : BIN WANG, BRIDGET KOGO, MAHMOUD CHIZARI
Preparation of S960QC steel specimens for fatigue testing: Effect of machining and post-treatments on surface residual stress
Author(s) : M. DABIRI, T. BJORK, T. SKRIKO
Cyclic heating effect on hardness of steel
Author(s) : TAHANY W. SADAK
Demand Response for Smart Home: An Evaluation from an End-User’s Perspective Based on a High Resolution Power Demand Model
Author(s) : EFRAIN BERNAL, JIAN XIE, MUSTAFA SUSLU
Acoustic Detection Utility for Pump Design and Management
Author(s) : C. CIARAVINO, G. CIARAVINO
Effects of Hole Transport and Injection Layers on the Efficiency of Flexible Organic Light-emitting Diodes
Author(s) : CHING-KONG CHAO, FA-TA TSAI, RWEI-CHING CHANG, SHENG-DA CAI
Kinematics Analysis and Simulation of a Rocker- Bogie Mobile Robot
Author(s) : IMAN DASHTI , MOHAMMAD REZA ELHAMI
Development of 3D Image Measurement System for Large Area
Author(s) : YEON TAEK OH
Upgrading Operational Capabilities with the Implementation of TPM Initiatives in an Indian Industry: A Case Study
Author(s) : PARDEEP GUPTA
